Extreme Duty - Steel Triangular Cup Dolly with Casters - Model 5500

Designed to move very heavy articles in places where traditional equipment is not feasible; the EXTREME WEIGHT DOLLY is a solution!

Normally a crane will lift the article and place it on a set of dollies for transport. The casters were chosen for the durability of the caster during rocking motion and uneven loads. The large diameter of the wheels supports easy start to rolling and allows the dolly to move over rougher surfaces; however, it is always best to use caution when moving very heavy articles over uneven floors or crevices.

Options: This product can be produced in aluminum or stainless steel, with various finishes, with various wheel and caster combinations, different cup diameters and depths or channel material welded to the top plate versus a cup.

DOLLY BODY: 3/8” Thick steel plate with 6” diameter straight sided well with a powder coat finish. Well clearance is 2” from the floor as our standard but can we change per your specifications.

CASTERS: Super duty kingpin-less casters are chosen for the durability of the kingpin-less design. The weakest link in a standard caster is kingpin failure causing the caster to break at the raceway; this is avoided in the kingpin-less caster design.

WHEELS: 6” diameter wheels made of durable 3/4” thick polyurethane thread with a heavy duty cast iron center and tapered roller bearings. The tread is 65 Shore D hardness polyurethane chemically bonded to the wheel center to assure durability in heavy duty service. The polyurethane is non-marking, non-staining and floor protective. It resists oil, grease, water and most solvents.

WEIGHT CAPACITY: 3500 lbs. per dolly

TEMPERATURE RANGE:-45° F to 180°F

WEIGHT: 85-105 lbs. each